ESP32 DevKit V1
Questi contenuti non sono ancora disponibili nella tua lingua.
The board as it appears on the Velxio canvas, with its full pin map
read live from the simulator (regenerated by scripts/gen-boards.mjs,
so it always matches what you can wire).
Family: ESP32 (classic) · Languages: Arduino C++, MicroPython, ESP-IDF
About this board
Section titled “About this board”The standard 30-pin ESP32 DevKit V1 — the workhorse of the catalog and the
board most ESP32 examples target. Dual-core Xtensa, WiFi and Bluetooth both
live in the simulator, and the built-in LED sits on GPIO2.
Everything the family page describes applies here first: real WiFi out to the internet, the LEDC PWM peripheral, ADC, I2C, SPI, UART, and a boot that prints the actual ROM log to the serial monitor.
Start here
Section titled “Start here”New ESP32 project opens the editor with this board and a working blink sketch. It is also the board used throughout the first project tutorial, the oscilloscope page and the WiFi guide.
Pins (32)
Section titled “Pins (32)”- EN
- VN
- VP
- 34
- 35
- 32
- 33
- 25
- 26
- 27
- 14
- 12
- 13
- GND
- VIN
- 3V3
- GND2
- 15
- 2
- 4
- RX2
- 16
- TX2
- 17
- 5
- 18
- 19
- 21
- RX0
- TX0
- 22
- 23
Every pin above is clickable on the canvas — click one to start a wire. Board-level behavior, quirks and example links live on the family page.