Arduino Nano ESP32
Questi contenuti non sono ancora disponibili nella tua lingua.
The board as it appears on the Velxio canvas, with its full pin map
read live from the simulator (regenerated by scripts/gen-boards.mjs,
so it always matches what you can wire).
Family: ESP32-S3 and ESP32-C3 · Languages: Arduino C++, MicroPython, ESP-IDF
About this board
Section titled “About this board”An ESP32-S3 in the classic Arduino Nano footprint, with an RGB LED on board. It is the bridge board for anyone with a Nano-shaped project who wants WiFi: the outline and pin naming follow the Nano, the silicon is Espressif’s.
Because the core is an S3, everything on the ESP32-S3 family page applies — including the choice of Arduino C++, MicroPython or ESP-IDF.
Start here
Section titled “Start here”No separate starter: open New ESP32-S3 project and swap the board, or place it from Add Component.
Pins (30)
Section titled “Pins (30)”- D12
- D11
- D10
- D9
- D8
- D7
- D6
- D5
- D4
- D3
- D2
- GND.1
- RST
- RX0
- TX1
- D13
- 3V3
- B0
- A0
- A1
- A2
- A3
- A4
- A5
- A6
- A7
- VBUS
- B1
- GND.2
- VIN
Every pin above is clickable on the canvas — click one to start a wire. Board-level behavior, quirks and example links live on the family page.