ESP32-C6 DevKit

The board as it appears on the Velxio canvas, with its full pin map read live from the simulator (regenerated by scripts/gen-boards.mjs, so it always matches what you can wire).

Family: Pro boards · Languages: Arduino C++, MicroPython, ESP-IDF

About this board

Espressif’s ESP32-C6 DevKit — the RISC-V, WiFi-6 generation — with the same language trio as the rest of the ESP32 family: Arduino C++, MicroPython and ESP-IDF, switched from the toolbar.

From a sketch’s point of view it behaves like the other RISC-V ESP32s in the catalog; the C6 is here so projects targeting the newer radio can be prototyped on the right part.

Start here

• Blink LED — the starter.
• SSD1306 OLED over I2C — the usual next step, and a check that the I2C bus behaves.

Pins (34)

• 3V3.1
• RST
• 4
• 5
• 6
• 7
• 0
• 1
• 8
• 10
• 11
• 2
• 3
• 5V.1
• GND.1
• NC.1
• GND.2
• TX
• 16
• RX
• 17
• 15
• 23
• 22
• 21
• 20
• 19
• 18
• 9
• GND.3
• 13
• 12
• GND.4
• NC.2

Every pin above is clickable on the canvas — click one to start a wire. Board-level behavior, quirks and example links live on the family page.