XIAO MG24 Sense
Это содержимое пока не доступно на вашем языке.
The board as it appears on the Velxio canvas, with its full pin map
read live from the simulator (regenerated by scripts/gen-boards.mjs,
so it always matches what you can wire).
Family: Pro boards · Languages: Arduino C++
About this board
Section titled “About this board”Silicon Labs’ EFR32MG24 Cortex-M33 in the XIAO footprint, Sense variant, with
a 6-axis IMU (LSM6DS3TR-C) on board. The in-browser engine boots the firmware
the Silicon Labs Arduino core produces; Serial reaches the monitor through
the board’s own USB bridge, and Wire, SPI, the ADC and PWM run.
The IMU is live: press Sensors on the canvas toolbar and drag the Tilt pad. As on the real board, the part only answers once the sketch has powered it from PD5. The Matter / Bluetooth radio is not emulated.
Start here
Section titled “Start here”- Blink — the shortest check that the board and toolchain work.
- OLED over I2C — an SSD1306 on the header pins.
- Knob and button — analog in, digital in, an LED out.
Pins (25)
Section titled “Pins (25)”- 32
- D0
- 33
- D1
- 34
- D2
- 35
- D3
- 36
- D4
- 37
- D5
- 38
- D6
- 5V
- GND
- 3V3
- 5
- D10
- 4
- D9
- 3
- D8
- 39
- D7
Every pin above is clickable on the canvas — click one to start a wire. Board-level behavior, quirks and example links live on the family page.