Wemos Lolin32 Lite

The board as it appears on the Velxio canvas, with its full pin map read live from the simulator (regenerated by scripts/gen-boards.mjs, so it always matches what you can wire).

Family: ESP32 (classic) · Languages: Arduino C++, MicroPython, ESP-IDF

About this board

A compact ESP32 in the Lolin footprint, with a LiPo charger on board — the same dual-core Xtensa chip and the same simulator support as the DevKit V1, in 26 pins.

Pick it when the physical board you are prototyping for is this one; the code side is identical to any other classic ESP32, so examples written for the DevKit run unchanged as long as the pins exist here.

Start here

No separate starter: open New ESP32 project and swap the board, or place it from Add Component.

Pins (26)

• VP
• VN
• EN
• GPIO34
• GPIO35
• GPIO32
• GPIO33
• GPIO25
• GPIO26
• GPIO27
• GPIO14
• GPIO12
• GND
• GPIO13
• GPIO15
• GPIO2
• GPIO0
• GPIO4
• GPIO16
• GPIO17
• GPIO5
• GPIO18
• GPIO23
• GPIO19
• GPIO22
• 3V

Every pin above is clickable on the canvas — click one to start a wire. Board-level behavior, quirks and example links live on the family page.