Skip to content

Pro boards

Pro boards are the catalog’s premium tier: branded hardware with rich built-in peripherals, emulated deeply enough to boot their factory firmware. They are part of the hosted catalog on velxio.dev.

Free plan.

M5 Cardputer ADV on the Velxio canvas

The ESP32-S3 pocket computer with keyboard and TFT. Boots the real M5 launcher firmware; type on the on-screen keyboard, run apps, use the speaker.

Get the real board on the M5Stack store.

M5Stack Core on the Velxio canvas

The classic stackable ESP32 with 320x240 TFT and three buttons.

Get the real board on the M5Stack store.

Store links on this page are affiliate links: Velxio earns a small commission at no extra cost to you.

Free plan.

Pimoroni Badger 2350 on the Velxio canvas

The RP2350 e-paper badge. It boots the complete BadgeOS factory firmware: navigate the launcher with the A/B/C/UP/DOWN buttons, open the clock, badge and gallery apps, and watch the e-paper refresh the way e-paper really does.

Pimoroni Galactic Unicorn on the Velxio canvas

The 53x11 RGB LED matrix (583 pixels) driven by an on-board Pico 2 W (RP2350), with the A/B/C/D and volume / brightness buttons.

Pimoroni Pico Plus 2 W on the Velxio canvas

Pimoroni’s RP2350B board in the standard Pico footprint (GP0..GP28 plus power), so any Pico wiring drops straight onto it. GPIO, UART, USB serial, I2C and SPI run; the CYW43 WiFi coprocessor and PSRAM are not emulated.

Free plan.

XIAO ESP32S3 Sense on the Velxio canvas

The S3 with the camera module, PDM microphone and microSD.

XIAO ESP32C6 on the Velxio canvas

WiFi 6 capable RISC-V C6 in the XIAO footprint.

XIAO RP2040 on the Velxio canvas

The RP2040 XIAO with its NeoPixel.

XIAO RP2350 on the Velxio canvas

The RP2350 XIAO — dual core at 150 MHz, Arduino C++ or MicroPython.

XIAO nRF52840 Sense on the Velxio canvas

Nordic’s nRF52840 with a 6-axis IMU: tilt it from the Sensors button on the canvas toolbar. Bluetooth is not emulated.

Seeeduino XIAO (SAMD21) on the Velxio canvas

The original XIAO, with a real DAC on A0.

XIAO RA4M1 on the Velxio canvas

The UNO R4 Minima’s MCU in the XIAO footprint, 12-bit DAC included.

XIAO MG24 Sense on the Velxio canvas

Silicon Labs’ EFR32MG24 with a 6-axis IMU. The radio is not emulated.

XIAO nRF54L15 Sense on the Velxio canvas

Nordic’s nRF54L15 with a 6-axis IMU. The radio is not emulated.

XIAO 1.47” IPS Touch Display on the Velxio canvas

Three carrier boards with a pre-soldered XIAO nRF52840 Plus, drawn front and back: the 0.96” (80 x 160, two buttons), the 1.14” (135 x 240, three buttons, Grove I2C) and the 1.47” Touch (172 x 320, capacitive touch, microSD). The glass is the emulated panel controller’s memory; the buttons, the IMU, the touch layer and the card all work, and Seeed’s own demo sketches run unchanged.

Free plan.

ESP32-C6 DevKit on the Velxio canvas

The ESP32-C6 DevKit — the RISC-V WiFi-6 chip, with the same language trio (Arduino / MicroPython / ESP-IDF) as the rest of the ESP32 family.

Paid plan required.

DFRobot UNIHIKER M10 on the Velxio canvas

A Linux single-board computer with built-in touchscreen — documented with the Raspberry Pi family, since it shares the full-Linux workflow. Like the rest of that family, it is the one board on this page that needs a paid plan to run.

Get the real board on the DFRobot store.

This store link is an affiliate link: Velxio earns a small commission at no extra cost to you.


Pro boards appear in the component picker with a PRO badge; the starter templates include ready-to-run projects for each.

Each board’s canvas art and full pin map, generated from the simulator:

Badger 2350 · Galactic Unicorn · Pico Plus 2 W · M5 Cardputer ADV · M5Stack Core · ESP32-C6 DevKit · XIAO ESP32S3 Sense · XIAO ESP32C6 · XIAO RP2040 · XIAO RP2350 · XIAO nRF52840 Sense · Seeeduino XIAO (SAMD21) · XIAO RA4M1 · XIAO MG24 Sense · XIAO nRF54L15 Sense · XIAO 0.96” IPS Display · XIAO 1.14” IPS Display · XIAO 1.47” IPS Touch Display · UNIHIKER M10