ESP32-C6 DevKit
Este conteúdo não está disponível em sua língua ainda.
The board as it appears on the Velxio canvas, with its full pin map
read live from the simulator (regenerated by scripts/gen-boards.mjs,
so it always matches what you can wire).
Family: Pro boards · Languages: Arduino C++, MicroPython, ESP-IDF
About this board
Section titled “About this board”Espressif’s ESP32-C6 DevKit — the RISC-V, WiFi-6 generation — with the same language trio as the rest of the ESP32 family: Arduino C++, MicroPython and ESP-IDF, switched from the toolbar.
From a sketch’s point of view it behaves like the other RISC-V ESP32s in the catalog; the C6 is here so projects targeting the newer radio can be prototyped on the right part.
Start here
Section titled “Start here”- Blink LED — the starter.
- SSD1306 OLED over I2C — the usual next step, and a check that the I2C bus behaves.
Pins (34)
Section titled “Pins (34)”- 3V3.1
- RST
- 4
- 5
- 6
- 7
- 0
- 1
- 8
- 10
- 11
- 2
- 3
- 5V.1
- GND.1
- NC.1
- GND.2
- TX
- 16
- RX
- 17
- 15
- 23
- 22
- 21
- 20
- 19
- 18
- 9
- GND.3
- 13
- 12
- GND.4
- NC.2
Every pin above is clickable on the canvas — click one to start a wire. Board-level behavior, quirks and example links live on the family page.