XIAO ESP32-S3
Este conteúdo não está disponível em sua língua ainda.
The board as it appears on the Velxio canvas, with its full pin map
read live from the simulator (regenerated by scripts/gen-boards.mjs,
so it always matches what you can wire).
Family: ESP32-S3 and ESP32-C3 · Languages: Arduino C++, MicroPython, ESP-IDF
About this board
Section titled “About this board”Seeed’s thumb-sized ESP32-S3: the same S3 silicon as the DevKit with only the pins that fit on a board the size of a thumbnail. Code is interchangeable — what changes is which GPIO numbers exist, so check the map below before moving a sketch across.
This is the plain XIAO S3. The camera-and-microphone variant is a separate board, XIAO ESP32S3 Sense.
Start here
Section titled “Start here”No separate starter: open New ESP32-S3 project and swap the board, or place it from Add Component.
Pins (14)
Section titled “Pins (14)”- D0
- D1
- D2
- D3
- D4
- D5
- D6
- D7
- D8
- D9
- D10
- 3V3
- GND
- 5V
Every pin above is clickable on the canvas — click one to start a wire. Board-level behavior, quirks and example links live on the family page.