XIAO ESP32-C3
Esta página aún no está disponible en tu idioma.
The board as it appears on the Velxio canvas, with its full pin map
read live from the simulator (regenerated by scripts/gen-boards.mjs,
so it always matches what you can wire).
Family: ESP32-S3 and ESP32-C3 · Languages: Arduino C++, MicroPython, ESP-IDF
About this board
Section titled “About this board”Seeed’s tiny C3 — the same single-core RISC-V chip as the C3 DevKit, in the XIAO footprint with a much smaller pin set. Sketches port straight across as long as the GPIO numbers they use exist here; the map below is the authority.
Start here
Section titled “Start here”No separate starter: open New ESP32-C3 project and swap the board, or place it from Add Component.
Pins (14)
Section titled “Pins (14)”- D0
- D1
- D2
- D3
- D4
- D5
- D6
- D7
- D8
- D9
- D10
- 3V3
- GND
- 5V
Every pin above is clickable on the canvas — click one to start a wire. Board-level behavior, quirks and example links live on the family page.