XIAO MG24 Sense
このコンテンツはまだ日本語訳がありません。
The board as it appears on the Velxio canvas, with its full pin map
read live from the simulator (regenerated by scripts/gen-boards.mjs,
so it always matches what you can wire).
Family: Pro boards · Languages: Arduino C++
About this board
Section titled “About this board”Silicon Labs’ EFR32MG24 Cortex-M33 in the XIAO footprint, Sense variant, with
a 6-axis IMU (LSM6DS3TR-C) on board. The in-browser engine boots the firmware
the Silicon Labs Arduino core produces; Serial reaches the monitor through
the board’s own USB bridge, and Wire, SPI, the ADC and PWM run.
The IMU is live: press Sensors on the canvas toolbar and drag the Tilt pad. As on the real board, the part only answers once the sketch has powered it from PD5. The Matter / Bluetooth radio is not emulated.
Start here
Section titled “Start here”- Blink — the shortest check that the board and toolchain work.
- OLED over I2C — an SSD1306 on the header pins.
- Knob and button — analog in, digital in, an LED out.
Pins (25)
Section titled “Pins (25)”- 32
- D0
- 33
- D1
- 34
- D2
- 35
- D3
- 36
- D4
- 37
- D5
- 38
- D6
- 5V
- GND
- 3V3
- 5
- D10
- 4
- D9
- 3
- D8
- 39
- D7
Every pin above is clickable on the canvas — click one to start a wire. Board-level behavior, quirks and example links live on the family page.