Arduino, running the sketch you wrote
arduino-cli compiles it, an AVR8 core executes it instruction by instruction, and the LCD shows what the ATmega328P actually put on the bus. Uno, Nano, Mega and ATtiny85, no board on your desk.

Hardware is all about iteration. Velxio lets you wire a circuit, program the board and run it in seconds, real firmware on a real solver, right in the browser.
DFRobot · M5Stack links on this page are affiliate links: a purchase through them earns Velxio a small commission at no extra cost to you.
Nothing on this page is a scripted animation: the firmware is compiled and executed, and the circuit around it is solved.
arduino-cli compiles it, an AVR8 core executes it instruction by instruction, and the LCD shows what the ATmega328P actually put on the bus. Uno, Nano, Mega and ATtiny85, no board on your desk.

arduino-cli or ESP-IDF compiles the sketch, then AVR8, RP2040, RISC-V, Xtensa or ARM executes it instruction by instruction. What the OLED draws and what the serial monitor prints is what the chip actually did.

ngspice compiled to WebAssembly runs a full nodal analysis about 60 times a second. GPIO pins drive real nets, ADC inputs read solved node voltages, and probes report RMS, DC and current wherever you drop them.

Adders, comparators, decoders, flip-flops and a 1-bit ALU slice: no microcontroller anywhere, just gates, switches and LEDs solved as a real net. The classroom half of electronics, without the breadboard.

The M5Stack Cardputer with its keyboard, Seeed's round display keeping time, Pimoroni's Badger 2350 driving e-paper, and DFRobot's UNIHIKER M10 in the catalogue alongside them. Their makers sent the hardware so the emulation could be checked against the real thing.




35 boards across 6 CPU architectures — AVR8, ARM Cortex-M, ARM Cortex-A, RISC-V, Xtensa, and Linux. Including partner boards from Pimoroni, M5Stack, Seeed Studio and DFRobot. All running locally, no cloud needed.
One institution contract gives every student in the class a full Pro account. No per-seat checkout, no card details in a classroom.
Private projects, BOM and schematic exports and GitHub Sync, for everyone enrolled.
Billed once to your institution, per semester or per year. Volume pricing on request for large cohorts.
Arduino, ESP32, RP2040, STM32, ATtiny and Raspberry Pi, with SPICE analog solved alongside the firmware. Not a sandboxed mock.
The simulator stays free forever, WiFi with internet included. Paid plans unlock the Linux and STM32 boards, custom WiFi networks and the local network gateway. Maker and Pro add the AI agent; No AI leaves it out.
Discover the simulator + light AI help.
The full workbench, zero AI. You write every line.
For makers shipping real circuits with AI help.
Private projects, GitHub Sync and BOM exports.
Questions, bugs and ideas: the Discord and the issue tracker are open, and so is every line of the simulator.
基于 Velxio 示例 Desk robot in a 3D World:ESP32-S3、长方形 TFT 熊脸、SG90 耳朵×2、履带差速、PIR + HC-SR04、I2S 语音,状态机 SLEEP/AWAKE/LISTENING/SPEAKING/ALERT。
An interactive ESP32-S3 circuit simulation you can run free in your browser on Velxio, by zhouzhi0713.
// 家庭陪伴机器人 V3 — 雪品金管家 (ESP32-S3 DevKit)
// 恢复版 2026-11-15:按 README §2-§5、§12-§14 重建(原 sketch.ino 丢失)
// 要点:
// - 电机:STM32 单字节 I2C 协议 (ADDR 0x14),绝不用 Seeed 0x82/0xAA 旧协议
// - 计时:10 秒判断用 millis()-seen>10000(比较时现取 millis),不用循环开头取的 n
// - 屏幕:白底(SLEEP 全黑除外);钥匙绝不进代码,走本地中转接口
#include <Arduino.h>
#include <math.h>
#include <SPI.h>
#include <Wire.h>
#include <WiFi.h>
#include <HTTPClient.h>
#include <driver/i2s.h>
#include <Adafruit_GFX.h>
#include <Adafruit_ILI9341.h>
#include <ESP32Servo.h>
// ---- 引脚(ESP32-S3 DevKit)----
#define TFT_MOSI 11
#define TFT_MISO 13
#define TFT_SCK 12
#define TFT_CS 38
#define TFT_DC 39
#define TFT_RST 40
#define EAR_L_PIN 1
#define EAR_R_PIN 2
#define PIR_PIN 4
#define TRIG_PIN 5
#define ECHO_PIN 6
#define BUZZER_PIN 7
#define MIC_PIN 10
#define I2S_BCLK 14
#define I2S_WS 15
#define I2S_DIN 16
#define I2S_DOUT 17
#define MIC_THRESHOLD 1500
#define ALERT_DIST 20
#define ALERT_EXIT_DIST 25
#define AWAKE_TIMEOUT_MS 10000UL
#define LISTEN_QUIET_MS 1000UL
#define MOTOR_ADDR 0x14
#define MOTOR_SPEED 60
// 电机命令(STM32 单字节 I2C)
#define M_BRAKE 0x00
#define M_CW 0x02
#define M_CCW 0x03
#define M_STANDBY 0x04
#define M_NOT_STANDBY 0x05
const char* WIFI_SSID = "Velxio-GUEST";
const char* VOICE_URL = "http://host.velxio.internal:8765/voice?raw=1";
Adafruit_ILI9341 tft(TFT_CS, TFT_DC, TFT_MOSI, TFT_SCK, TFT_RST, TFT_MISO);
Servo earL, earR;
enum State { SLEEP, AWAKE, LISTENING, SPEAKING, ALERT };
State st = SLEEP;
int dist = 200;
int ovr = -1;
unsigned long seen = 0;
unsigned long lastLoud = 0;
int motorV = 0;
int earLPos = 90, earRPos = 90;
int sayIdx = 0;
bool i2sOk = false;
const char* LINES[3] = {"你好呀,我在听。", "嗯,我在这儿呢。", "好呀,我们一起玩吧。"};
const char* stateName(State s) {
switch (s) {
case SLEEP: return "SLEEP";
case AWAKE: return "AWAKE";
case LISTENING: return "LISTENING";
case SPEAKING: return "SPEAKING";
case ALERT: return "ALERT";
}
return "?";
}
void sendMotor(uint8_t cmd, uint8_t ch, uint8_t spd, bool hasSpd) {
Wire.beginTransmission(MOTOR_ADDR);
Wire.write(cmd);
Wire.write(ch);
if (hasSpd) Wire.write(spd);
Wire.endTransmission();
delay(1);
}
void motor(int v) {
motorV = v;
if (v == 0) {
sendMotor(M_BRAKE, 0, 0, false);
sendMotor(M_BRAKE, 1, 0, false);
return;
}
uint8_t s = (uint8_t)(abs(v) * 255 / 100);
uint8_t d1 = v > 0 ? M_CW : M_CCW;
uint8_t d2 = v > 0 ? M_CCW : M_CW;
sendMotor(d1, 0, s, true);
sendMotor(d2, 1, s, true);
}
void go(int v) { motor(v); }
void setEars(int l, int r) {
earLPos = l; earRPos = r;
earL.write(l);
earR.write(r);
}
void drawFace(State s) {
if (s == SLEEP) { tft.fillScreen(ILI9341_BLACK); return; }
tft.fillScreen(ILI9341_WHITE);
uint16_t blue = ILI9341_BLUE;
uint16_t navy = tft.color565(0, 0, 139);
uint16_t pink = tft.color565(255, 182, 193);
if (s == ALERT) {
tft.fillCircle(105, 90, 26, blue);
tft.fillCircle(215, 90, 26, blue);
tft.fillCircle(97, 82, 7, ILI9341_WHITE);